🔥 The Fire Extinguishing System Electrical Panel is designed to control, operate, and automatically monitor all critical equipment involved in the fire suppression process. It is an integral part of the building’s fire safety system and is engineered to function reliably under emergency conditions, ensuring:
Uninterrupted power supply
Rapid activation of fire suppression equipment
Automatic and manual/local control options
The panel is directly interfaced with the Fire Detection and Alarm System (FDAS) and responds immediately upon receiving an alarm signal by activating pumps, fans, solenoid valves, and other components of the fire suppression installation.
🔌 Secure and Redundant Power Supply
To ensure operation under all scenarios, the panel is powered by two independent sources:
The main electrical grid
A backup power source (generator or UPS), automatically switched via an ATS (Automatic Transfer Switch)
⚙️ Internal Equipment
The panel is equipped with:
Contactors, fuses, and monitoring relays
Programmable relays
PLC (Programmable Logic Controller)
Visual and audible indicators for operational, fault, and failure status
Optional: HMI (Human-Machine Interface) display with testing/reset functions
🔗 System Integration
The panel can send control signals and status feedback to:
BMS (Building Management System)
FSS (Fire Safety System)
Alarm and intervention dispatch centers
📏 Compliance with Standards
Designed and built according to the following standards:
EN 61439 – Low-voltage switchgear and controlgear assemblies
NFPA 20 – Standard for the installation of stationary pumps for fire protection
IGSU Regulations (P118, I7) – National fire safety regulations (Romania)
🏢 Applications
The fire extinguishing panel is essential in both civil and industrial buildings, including:
Production halls and warehouses
Shopping centers
Hospitals and medical facilities
Underground and above-ground parking garages
Tunnels
Office buildings
🔒 Reliability. Safety. Compliance.
A critical component in the architecture of any modern fire prevention and suppression system.
CONFIGUREAZĂ AICI
| Item | Description |
|---|---|
| Panel type | Metal with backplate, IP66 (enclosure), IP55 (cabinet) |
| With door | Metal, right-opening |
| Mounting | Indoor, flush/surface mounted (enclosure) / on floor (cabinet) |
| With 200mm plinth | For cabinets |
| Separation form | Form 1 |
| Certification | Standard (IEC 61439) |
| Inputs/outputs | Bottom/bottom |
| With cable glands | PVC, PG type |
| With terminals | With screw and/or spring |
| With PE bar/strip | Yes |
| Reserved space | 25% |
| Color | Manufacturer standard (RAL 7035) |
